Mesa Labs氣體流量計 Definer 220M

Flow Ranges
Low:  5-500ccm
Medium:  50-5,000ccm
High:  300-30,000ccm

精度范圍：讀數1%

氣體的兼容性：使用*，不結霜，不易烯，濕度小于70%的氣體

流程模式：壓力和吸力抽氣

溫度和壓力的傳感器：壓力：3.5mmHg(典型)，7.0mm（zui大）

溫度：0.8deg C(典型),1.3deg C（zui大）

交流電池充電器：220V轉12V DC

讀數模式：?jiǎn)窝h(huán)，連續性或 脈沖式

可從1－100measurements中選擇取得一個更高的平均值功能。

工作壓力：15PSI

溫度范圍：0-70度

濕度范圍：0-70%不結霜

顯示器：背光照明液晶顯示器

尺寸：140mm H×150 mm W×75 mm D

重量：820 g

Mesa Labs氣體流量計 Definer 220M

Features
Single, Continuous and Burst reading options
Accuracy Volumetric (% of reading) 0.75%
Accuracy Standardized (% of Reading) 1%
Temperature & Pressure Sensors in flow stream
Temperature Readings: C°, F°
Pressure Readings: mmHg, PSI, kPa
MFC Gas Sensor Factor for Calibration of Alternate Gases other than Clean Air and N2.
Volumetric Flow Readings – mL/min, L/min, cc/min, cf/min
Standard Flow Readings – smL/min, sL/min, sccm, scf/min
1/4″ ID Swagelok? Compression Fittings
Data Port: Serial (RS-232)

 Definer 220M

Now more than ever, modern industry requires precisely-honed process control systems. Requirements, standards and competition have become so demanding, and the margin for error so slim, that for many organizations, 2% or 3% of reading standardized accuracy is no longer enough.
The Definer 220 allows users to verify gas flow rates, in the field or in the lab, to an accuracy of 1% percent of reading, including temperature and pressure compensation. Unlike thermal mass flow meters, the Definer 220′s positive displacement technology provides immediate indication of actual volumetric gas flow rate – accuray and independently of gas type. Integrated temperature and pressure sensors in the flow stream allow users to automatically standardize volumetric flow readings to standard conditions, for traceable verifications of mass flow devices.

The Definer 220 represents the next generation of our Proven DryCal? Technology developed specifically for critical industrial and environmental applications. It provides the accuracy, customization and durability needed in today’s exacting, fast-paced workplace.

For use with non-corrosive, non-condensing, non-combustible gases, less than 70% humidity.